Terms and conditions of sale

General Terms and Conditions of Sale

1. AGREEMENT: Any of the terms and provisions of Buyer’s order which are inconsistent with the terms and provisions hereof shall not be binding on MSI and shall not be considered applicable to the sale of the products mentioned herein. Unless Buyer notifies MSI in writing to the contrary before placing an order, acceptance by Buyer of these terms and conditions shall be inferred and, the shipment by MSI of the products covered hereby shall be deemed to be subject to the terms and conditions hereof. No modification hereof shall be valid unless expressly accepted in writing by an authorized representative of MSI.

2. PRICES: Prices in the order are fixed and include the cost of commercial packaging. The prices are based on the corresponding and relative MSI quote that must be referenced on any order. Unless otherwise specified on the order, prices are for the specific quantity stated and do not include taxes or charges for transportation, engineering documentation, special packaging, marking or testing.

3. MINIMUM ORDER: Unless otherwise specified, a minimum value of one thousand ($1,000) dollars will be required for MSI to process an order. All repair orders are subject to an evaluation charge that is funded by Buyer and upon submission of MSI evaluation a repair charge will be provided in order for MSI to process a repair order.

4. QUANTITY DISCOUNTS: When quantity price discounts are quoted, they are computed separately for each type of product or equipment, and are based on the quantity of each type ordered at any one time for immediate delivery. If any order is reduced or canceled, all prices shall be reviewed and adjustments shall be mutually agreed to, if applicable, for the uncanceled quantity. Cancellation of any orders can be made only with MSI’s written consent thereto and upon such terms as will satisfy all costs incurred by MSI and its proportionate profit on work completed.

5. ORDER SCHEDULING: Orders are to be scheduled for delivery AS QUOTED, unless otherwise agreed upon or negotiated in writing. If not specifically covered under written contract, any deliveries scheduled beyond 12 months will be subject to price escalation as determined by MSI.

6. QUALITY LEVELS: Prices are based on quality levels commensurate with normal processing. If a different quality level is required, Buyer must specify requirements and pay any additional costs that may be applicable.

7. TAXES: The prices quoted by MSI do not include sales, use, excise or other similar taxes. The Buyer shall pay, in addition to the prices quoted, the amount of any Federal, State, City, or other tax, import or export duty, tariff or customs charge levied by any jurisdiction either inside or outside the United States which is applicable to the sale of goods or performance of services by MSI or in lieu thereof the Buyer shall supply MSI with an appropriate tax exemption certificate.

8. TERMS: Unless otherwise stated, payment terms are net 30 days from date of invoice, subject to credit approval by MSI. MSI reserves the right to require payment in advance, C.O.D. or otherwise modify credit terms either prior to, or after order acceptance if, for any reason, Buyer’s credit is or becomes objectionable to MSI. Pending correction of any objectionable credit situation, MSI may withhold shipments without incurring any liability to Buyer. When partial shipments are made, payments therefore shall become due in accordance with the payment terms of the invoice. A service charge of 1½% per month on the unpaid balance shall be imposed on all accounts not paid when due.

9. SHIPMENT: All shipments will be made F.O.B. Origin from MSI factory unless otherwise specified. In the absence of specific instructions, MSI will select the carrier. Title to the material shall pass to the Buyer upon delivery by MSI to the carrier or delivery service. Buyer is also held liable for any import/export duties imposed by the carrier and customs department of the ultimate destination. All Export shipments shall be per the INCOTERMS EXW.

10. DELIVERY: MSI acknowledged shipping dates are approximate. If Buyer’s order does not cite desired delivery date(s) and/or does not expressly prohibit delivery in advance of schedule date(s), Buyer agrees that immediate delivery is acceptable. If conditions arise which prevent compliance with delivery schedules that are in whole or in part beyond the control of MSI, MSI shall not be liable for any damages of any type, including but not limited to general damages, special damages, consequential damages, or any other types of damages, for any delay in delivery, or for failure to give notice of delay, and such delay shall not constitute grounds for cancellation.

11. FORCE MAJEURE: MSI shall not be liable for any failure to deliver, failure to give notice of delay, or delay in the delivery of any goods or service due to a force majeure event, including but not limited to acts of God, acts of civil or military authority, fires, epidemics, floods, riots, wars, sabotage, labor disputes, governmental actions, or inability to obtain materials, labor, components, manufacturing facilities, or transportation. In the event of any such delay, the date of delivery or performance hereunder shall be extended by a period equal to the time lost by reason of such delay. In the event MSI’S production is curtailed for any of the above reasons, MSI may allocate its production among its various customers in a commercially fair and reasonable manner.

12. INSPECTION AND ACCEPTANCE: Buyer must notify MSI in writing within fourteen (14) days from date of shipment of any products that Buyer is rejecting, and the reason (s) why the products are being rejected. If written notification is not received by MSI within fourteen (14) days of shipment, products will be deemed to have been accepted by Buyer.

13. PRODUCT WARRANTY:

A. Warranty - MSI warrants that at the time of shipment the products manufactured by MSI and sold hereunder will be free from defects in material and workmanship, and will conform to the specifications furnished by or approved by MSI.

(1) If any defect within this warranty appears, Buyer shall notify MSI immediately.

(2) MSI agrees to repair or furnish a replacement for any product which, within one year from the date of shipment by MSI shall, upon test and examination by MSI, prove defective based upon the above specified warranty. MSI will not be responsible for installation or disassembly, or any costs related to installation or disassembly of products shipped to Buyer that are proven to be defective under this warranty clause.

(3) No product will be accepted for return or replacement without written authorization of MSI. Upon such authorization, and in accordance with instructions by MSI,
the product will be returned shipping and all other charges prepaid by Buyer. Replacements made under this warranty will be shipped repaid.

B. Warranty Exclusions

(1) THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER EXPRESSED OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. MSI EXPRESSLY
DISCLAIMS ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, THAT MAY ARISE UNDER THE LAW.

(2) If the Buyer purchases units or components from any supplier other than MSI, the Buyer shall bear only the warranty given by the manufacturer of that product,
and MSI assumes no responsibility for the integration of its product with any other product.

(3) MSI WILL NOT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, OR FOR LOSS, DAMAGES, OR EXPENSE DIRECTLY OR INDIRECTLY ARISING FROM THE
USE OF THE PRODUCTS OR ANY INABILITY TO USE THEM EITHER SEPARATELY OR IN COMBINATION WITH ANY OTHER EQUIPMENT OR MATERIAL OR FROM ANY OTHER CAUSE.

(4) The warranty does not extend to any product manufactured by MSI which has been subjected to misuse, neglect, accident, improper installation or to use in
violation of instructions furnished by MSI.

(5) The warranty does not extend to or apply to any unit which has been repaired or altered at any place other than at MSI’s factory or by persons not expressly
approved by MSI.

14. PATENT INDEMNITY: To the extent that it delivered hereunder are manufactured in accordance with designs furnished by Buyer, Buyer agrees to indemnify MSI
and hold MSI harmless from all legal expenses which may be incurred as well as all damages and costs which may finally be assessed against MSI in any action for
infringement of any United States Letters Patent by such it delivered hereunder.

MSI agrees promptly to inform the Buyer of any claim for liability made against MSI with respect to such it and MSI agrees to cooperate with the Buyer in every way
reasonably available to facilitate the defense against any such claim.

15. MODIFICATIONS: Unless otherwise agreed upon between Buyer and MSI, MSI reserves the right to modify product specifications of products ordered by the Buyer
herein providing that the modification will not substantially and materially affect the product material, form, fit, or function.

16. TOOLING: Unless otherwise expressly provided, MSI shall retain title to and possession of any models, patterns, dies, molds, jigs, fixtures, tools, and test equipment
made for or obtained for the performance of this order.

17. GOVERNING LAWS: The validity, performance and construction of these terms and conditions and all sales hereunder shall be governed by the laws of the State
of New York.

18. DISPUTE RESOLUTION: All disputes arising out of or in connection with an order placed by Buyer that is subject to these Terms and Conditions shall be finally
settled under the Rules of Arbitration of the International Chamber of Commerce by one arbitrator appointed in accordance with the said Rules. The Buyer and MSI
agree, pursuant to Article 30(2)(b) of the Rules of Arbitration of the International Chamber of Commerce, that the Expedited Procedure Rules shall apply irrespective
of the amount in dispute. The seat and place of an arbitration shall be New York City.

19. LIMITATION OF LIABILITY: MSI will not be liable for any loss, damage, cost of repair, incidental or special or consequential damages of any kind, whether or not
based upon express warranty or implied warranty (except for the obligations assumed by MSI under the Product Warranty Clause), contract, negligence, any other
tort, or strict liability arising in connection with a claim or putative claim in connection with an order by Buyer that is subject to these Terms and Conditions. In no
event will MSI be liable to Buyer for any amount in excess of the purchase price of the product under any circumstance.

20. SUPPLEMENTAL CLAUSES FOR EXPORT ORDERS:

A. Currency – The prices quoted herein are payable in U.S. dollars.

B. License and Permit Requirements

(1) MSI will secure all export licenses and permits required by the United States Government, except in those cases where the Buyer already holds a valid export
license or agrees to obtain one. When MSI secures the license application, the Buyer will furnish reasonable cooperation in providing the required information. Unless
otherwise agreed upon, if such licenses and permits are not paid for by Buyer, such payments will be added to the contract price.

(2) Buyer will secure all licenses and permits required by the foreign government and MSI will furnish reasonable cooperation in acquiring such licenses and permits.
The delivery schedule is contingent upon securing all necessary licenses and permits.

(3) Failure to obtain a required license or permit in sufficient time to permit delivery with the time set forth in the contract and without fault or negligence of the
contracting parties, shall necessitate an adjustment in the delivery schedule.

Termination liability clause

1. EXCUSABLE DELAYS: MSI shall not be liable for any cost for the failure or delay in making deliveries when such failure or delay is due to any cause beyond its control and without the fault or negligence of MSI and/or its Subcontractors of any tier. MSI will provide the Buyer notice when it appears that such cause will delay deliveries under this Contract. Such causes may include, but are not restricted to: 1) acts of God or of the public enemy, 2) acts of the Government in either its sovereign or contractual capacity, 3) fires, 4) floods, 5) epidemics, 6) quarantine restrictions, 7) strikes, 8) freight embargoes and unusually severe weather.

2. TERMINATION OF CONTRACT BY BUYER:

If Buyer decides to terminate this Contract in whole or in part MSI shall promptly

1) terminate the work, minimizing costs and liabilities for the terminated work, (2) protect, preserve, and deliver in accordance with Buyer’s instructions any property related to the Contract in MSI’s possession and (3) continue the performance of any part of the work not terminated.

Upon termination, MSI will assess and advise Buyer of all stock including completed or uncompleted items or raw, semi-processed or completed materials to be used in fulfilling the Contract.

(1) For completed items or materials, MSI will deliver to the Buyer those completed goods upon which the Buyer will make payment at the Contract price.

(2) For uncompleted items or raw or semi-processed materials, MSI will deliver to the Buyer or dispose of at the Buyer’s discretion all or part of such goods at the portion of the Contract price representing the stage of completion.

(3) For goods which MSI has under firm subcontract, MSI may at its option either take an assignment of the Buyer’s right under the Contract or pay the cost, if any, of settling or discharging Buyer’s obligation under the Contract.